Atari 2600 Games ( see image ): The Player 1 Start button acts like the Game Select button (usually used to change the game mode), the Player 2 start button acts like the Game Reset button which means the Player 2 Start button is the Start game button.We manually email cabinet tracking, while PC tracking is sent by our automated system.The game discs are for backup purposes only and already loaded on the PC, you can simply store them inside the cabinet.You will be connecting a total of 3 USB cables to the PC, a power cord, a monitor cable, and an audio cable.
If your PC only has 3 USB ports on the back, there are 2 more on the front (behind a door on some models). The Purple round PS2 connectors are not used The greenwhite cable is not needed ( for connecting coin door only ), simply store it in the cabinet. The X-Arcade Tankstick manual is a general manual for using the control panel itself, as it uses the same electronics. WARNING: Do not turn off the cabinet power without first turning off the PC properly by simply tapping (do not hold) the power button on the front of the PC. Initial Setup: Open the front door and place the PC, keyboard, and mouse in the bottom section of the cabinet. The controls, audio, and VGA video cables are already waiting inside near the PC. Connect the 3 USB connections (for keyboard, mouse, and control panel) into the back of the PC. The round purple PS2 connectors are not used.) Connect the blue VGA monitor cable to the back of the PC and lightly tighten the 2 hand-screws on it. Connect the greenblack headphone cable into the green headphone jack on the back of the PC (typically the center port). Plug one end of the power cable that came with the PC into the back of the PC, and the other end into the white power strip. Connect the other power cable between the cabinet and your wall socket, then turn on the power switch on the back of the cabinet and the power strip if needed. A surge protector is recommended which will also give you an easier way to power onoff the cabinet without having to get behind it. The screen will go black on the first boot for a few minutes while it scans the games for the first time. Basic Operation: IMPORTANT: If the light on the top-right of the control panel is not lit, it will not work. Be sure all of the USB connections are connected, move them around to other ports if you have trouble. To choose a game, first pick which system you want to play using the joystick, then press the Player 1 Start button (white button with 1 man). Also use the joystick to scroll the list of games and press Start again to start one. After you start up an Arcade game (MAME menu), use the left pinball flipper button on the left side of the cabinet to insert coins, and then press the white start button(s) with men on them to play. If a game only used 1 button, then it will always be button 1 closest to the joystick. If a game uses 2 buttons, then it will add button 2, and so on. To Exit a game, HOLD the left pinball button and press the Player 1 Start button.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |